Menu
Oct 26, 2018 Is there a way to remap a code for engraving, I would like to make a macro if not exactly the same then as close as possible to a haas G47. Example G47 P0 X-3. Dec 06, 2015 I have Macro Based marking programs for Fanuc, Mitsubishi, and Okuma CNC mills that do A-Z (caps only), 0-9, Dot, dash. These programs can serialize up to 9999 (can be rewritten for larger quantities), and they are very easy to set up at the machine. The Characters are set at.125' and can be.
Saddle Archives. The specifications listed are for Crates models made from the early 1980s until 2010. There are some duplications where we made more than one saddle using the same model number. Contact us if you need clarification on any model number. An updated version will be available soon. Crates Classic Reining Saddles The Crates 2222 is available in 4 seat sizes, 4 colors, and a WIDE 7' gullet in 15 ½', 16', and 17' seats. At 28 pounds, it is ideal for young people and ladies. Crates saddle serial number info. Each saddle carries a dated serial number and will be only one of a few made each year. Your new saddle could be one of that limited number so check out our website. Crate saddle, are only limited by the size of your dreams. As we increase our capacity and production, we will continually add new models in Barrel, Arabian, Gaited, Endurance, as well as a complete tack line. The ARCHIVES section of this website lists hundreds of models from the past 35 years. Please contact Fabtron or Crates for more information on.
- Forum Actions
- Quick Links
Thread Tools
Display
- the_machinist_Plastic
- Join Date
- May 2014
- Location
- SF Bay Area
- Posts
- 19
- Post Thanks / Like
- Likes (Given)
- 1
- Likes (Received)
- 13
Serial Engraving Macro
Hello friends,
I recently released an open source macro for engraving serial numbers.
https://twitter.com/the_machinist_/s..88520096432129
It has a couple of features:- Self-incrementing serial number
- Engrave serials of any length
- Engrave letters, numbers, space, dash, and colon
- Open source @ GitHub
I've tested it on our Haas machines from 2002-2013. I'm happy to make changes to get it running on your machine, or show you how to use if you are confused.
You can find the code on GitHub: https://github.com/themachinist/SerialEngrave
If you need to report a bug or would like to request a feature please use GitHub. I will respond to pull requests.
If you have any questions feel free to email me at [email protected].
Regards,
Dave
[email protected]
https://twitter.com/the_machinist_
blog @ the.machini.st/Last edited by the_machinist_; 06-02-2014 at 10:36 PM.
- Vancbiker, Big B, yardbird, TeachMePlease, Mtndew liked this post
- Diamond
- Join Date
- Jan 2014
- Country
- UNITED STATES
- State/Province
- Washington
- Posts
- 4,360
- Post Thanks / Like
- Likes (Given)
- 802
- Likes (Received)
- 2349
Nice contribution! Thanks. Though I have a serial engraving macro already, I appreciate looking at others work to learn new techniques and possibly integrate improvements in my existing macros.
- SDConceptsStainless
- Join Date
- Mar 2007
- Location
- warren, mi
- Posts
- 1,184
- Post Thanks / Like
- Likes (Given)
- 125
- Likes (Received)
- 306
I have two older haas machines will it work on those? 1995 vintage. these are pre haas engraving macro.
- Titanium
- Join Date
- Jun 2009
- Location
- Michigan, USA
- Posts
- 2,173
- Post Thanks / Like
- Likes (Given)
- 3305
- Likes (Received)
- 1714
Hi Dave,
Pretty nice gesture to offer a free program like that. Hopefully some day I will be able to make use of it. Right now I have been trying to figure out how I would be able to cut letters and numbers on my vmc. It is a 1994 Clausing Kondia with a Dynapath Delta 20 control.
Does your program need some sort of post processer to run on different machines than Haas machines?
Big B - the_machinist_Plastic
- Join Date
- May 2014
- Location
- SF Bay Area
- Posts
- 19
- Post Thanks / Like
- Likes (Given)
- 1
- Likes (Received)
- 13
All you need to do is load the program into your control via DNC. If it doesn't run then I can help you get it running. I'm not familiar with Dynapath controls but you should be fine provided you have macro support.Originally Posted by Big BHi Dave,
Pretty nice gesture to offer a free program like that. Hopefully some day I will be able to make use of it. Right now I have been trying to figure out how I would be able to cut letters and numbers on my vmc. It is a 1994 Clausing Kondia with a Dynapath Delta 20 control.
Does your program need some sort of post processer to run on different machines than Haas machines?
Big B
Not every machine will support the variable ranges I am using and if your control uses some kind of Fanuc Macro A you will be out of luck with the serialization. However, the letters and numbers are incremental subprograms. You can use them however you want.
The open source movement has started to become mainstream to the point that it is spilling over into other disciplines. It would be nice if it would spread to manufacturing faster but this seems to be a traditionally proprietary industry. There is a far greater amount of hobbyist content versus professional content around the web but there are a few resources and applications with the power to change that (GrabCAD, Instructables, iFixIt, Stack Exchange, Wikipedia, Discourse). I try to do my part where I can because I am really into social things. - the_machinist_Plastic
- Join Date
- May 2014
- Location
- SF Bay Area
- Posts
- 19
- Post Thanks / Like
- Likes (Given)
- 1
- Likes (Received)
- 13
I can't get my hands on a Haas that old. Check to make sure that macros are enabled. It should be parameter 57 bit 22.Originally Posted by SDConceptsI have two older haas machines will it work on those? 1995 vintage. these are pre haas engraving macro. - Diamond
- Join Date
- Jan 2014
- Country
- UNITED STATES
- State/Province
- Washington
- Posts
- 4,360
- Post Thanks / Like
- Likes (Given)
- 802
- Likes (Received)
- 2349
It's been ~20 years since I last touched a Delta 20 control, but IIRC it did not have user macro capability.Originally Posted by the_machinist_If it doesn't run then I can help you get it running. I'm not familiar with Dynapath controls but you should be fine provided you have macro support. - SDConceptsStainless
- Join Date
- Mar 2007
- Location
- warren, mi
- Posts
- 1,184
- Post Thanks / Like
- Likes (Given)
- 125
- Likes (Received)
- 306
the parameter is enabled and it has the haas engraving macro loaded but the control won't recognize it. it just skips it in the program like its not even there.
- the_machinist_Plastic
- Join Date
- May 2014
- Location
- SF Bay Area
- Posts
- 19
- Post Thanks / Like
- Likes (Given)
- 1
- Likes (Received)
- 13
- the_machinist_Plastic
- Join Date
- May 2014
- Location
- SF Bay Area
- Posts
- 19
- Post Thanks / Like
- Likes (Given)
- 1
- Likes (Received)
- 13
Hello friends,
I have made significant updates to the Serialization macro. It is now compatible with and tested on Fanuc 16/18 controls.
You may need to adjust parameter 3202 Bit 4 (NE9) to upload programs to the 9000 range. If you get Alarm 10 IMPROPER G CODE when trying to use G68, then you need to enable the option parameter for it.
https://github.com/themachinist/SerialEngrave
Thanks,
Dave - Cast Iron
- Join Date
- Sep 2013
- Country
- UNITED STATES
- State/Province
- Ohio
- Posts
- 346
- Post Thanks / Like
- Likes (Given)
- 196
- Likes (Received)
- 176
- Site Areas
- Forums
- Manufacturing Today
- Specific Machine Forums
- Open Discussion
- Commerce
- Machinery Manual, Brochure and Photo Archives
- Forum features
«Previous Thread | Next Thread»
Cnc Engraving Macro Definition
Bookmarks
Cnc Engraving Machine
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Cnc Engraving Macro Machine
- BB code is On
- Smilies are On
- [IMG] code is On
- [VIDEO] code is On
- HTML code is Off